Home › Commercial Brick Veneer Systems
Reliable, professional commercial brick veneer in Fort Lauderdale, FL from Superior Masonry Fort Lauderdale. Contact us today for a free on-site estimate.
Superior Masonry Fort Lauderdale provides professional commercial brick veneer throughout Fort Lauderdale, FL, Florida and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call (754) 254-3509 or request your free quote.
Commercial Brick Veneer Expertise for Fort Lauderdale Properties
Superior Masonry Fort Lauderdale designs and installs commercial brick veneer systems that are tailored to the way buildings are actually used in Broward County. Our focus is durable, code-compliant veneer cladding that stands up to coastal humidity, intense sun, and hurricane-season wind and rain while still presenting a polished, professional façade for your business.
We work on office buildings, retail plazas, restaurants, warehouses, medical offices, schools, and mixed-use projects across Fort Lauderdale. Whether you are refreshing an aging stucco exterior with a new brick skin or integrating brick veneer into new construction, we plan the system around your specific structure, not a one-size-fits-all detail pulled from a catalog.
From the first site visit, we evaluate your existing wall assemblies, drainage paths, and structural support so the brick veneer is not just attractive, but also functional and long lasting in the South Florida climate.
How a Commercial Brick Veneer System Is Built
A properly built commercial brick veneer is a layered system, not just brick glued to a wall. Our team starts by confirming the substrate, which may be CMU block, poured concrete, steel stud framing, or tilt-up panels. We check for cracks, out-of-plumb sections, and moisture intrusion and correct those issues before any veneer goes up.
Next, we install or verify a weather-resistive barrier and flashing at critical points such as window heads, sills, base of wall, and roof-to-wall transitions. In Fort Lauderdale, good flashing and drainage are essential because summer downpours can drive water into any small opening. We incorporate through-wall flashing and end dams so water that gets behind the brick can exit instead of sitting inside the wall.
We then lay out the brick veneer using control joints, relief angles (where needed), and carefully calculated coursing so the brick lines finish cleanly at window heads, parapets, and expansion joints. We install brick ties or anchors that are compatible with your structure and meet local code requirements, spacing them correctly to resist wind loads common in coastal Florida.
Finally, we tool and finish the mortar joints, clean the brick surface with appropriate methods that will not etch or stain the brick, and perform a quality review to confirm weep holes, joints, and anchorage are in place and functioning as intended.
Design Options That Fit Your Brand and Property
Commercial brick veneer gives you a lot of flexibility in how your building looks. Superior Masonry Fort Lauderdale works with a wide range of brick manufacturers that supply products tested for coastal environments. You can choose from classic red modular brick, elongated modern formats, tumbled or reclaimed-look brick, and smooth or wire-cut textures.
Color is a major part of branding. We can help you coordinate brick colors with your logo and existing finishes such as storefront systems, metal panels, stucco, or painted concrete. For example, many Fort Lauderdale retail and hospitality projects blend a light sand-colored brick with white stucco and aluminum accents to keep the building cooler and reflect intense sunlight.
We also help you decide on mortar color and joint style. A light mortar can make a façade appear larger and more open, while a darker or contrasting mortar can emphasize the brick pattern. Joint profiles, such as concave, flush, or raked, change the shadow lines on the wall and can either soften or sharpen the building’s appearance.
Architectural details such as soldier courses above windows, projected brick bands at floor lines, brick columns at entries, or accent panels at corners can be incorporated without compromising drainage and movement joints. Our team coordinates with your architect or directly with you to ensure these features can be built efficiently and maintained over time.
How Fort Lauderdale’s Climate Shapes Brick Veneer Installation
In Fort Lauderdale, commercial brick veneer must cope with high humidity, salt-laden air, and frequent heavy rain. Superior Masonry Fort Lauderdale selects brick, ties, anchors, and mortars that are appropriate for a marine-influenced environment. Corrosion resistance is not an upgrade here, it is standard practice, especially for steel anchors and shelf angles.
Summer heat and afternoon storms affect when and how we work. We schedule mixing and placement of mortar in ways that avoid flash drying, which can weaken joints or cause excessive cracking. When necessary, we shade work areas or adjust water content and admixtures according to actual on-site conditions, not just manufacturer brochures.
Hurricane season brings additional design considerations. We pay close attention to local building code requirements for wind loads, corner zones, and parapet heights. Anchor spacing, embedment depth, and connection to structural components are laid out so that the veneer system can handle uplift and lateral forces expected in Broward County. We also ensure that weep holes and vents are protected from wind-driven rain while still allowing moisture to exit the wall.
Because afternoon storms are common, staging and protection of materials are crucial. Brick and mortar materials are stored off the ground and covered, and partially built walls are protected so water does not saturate fresh mortar or wash out joints.
Cost Drivers for Commercial Brick Veneer Projects
The cost of a commercial brick veneer system in Fort Lauderdale depends on several specific factors. The most significant are wall area and building height, since taller structures require more scaffolding, safety measures, and anchorage detailing. Complex building shapes with many inset entries, projections, and window openings generally take longer to build and can increase labor time.
Substrate condition is another major driver. If your existing block or concrete walls are out of plumb, cracked, or have moisture issues, we must address those before veneer installation. Corrective work might include patching, parging, or adding furring to create a flat, uniform surface for the veneer. Investing in this prep work helps prevent movement cracks, bulging, and water problems later.
Material choices influence cost too. High-end architectural brick blends, custom shapes, and specialty mortars are more expensive than standard products, and long lead times can affect your schedule. If your project is on a tight timeline, we will recommend brick options that are readily available from regional yards that serve South Florida.
Access and logistics matter. Downtown Fort Lauderdale sites with limited staging space, busy streets, or restricted delivery hours require more coordination, which can add to overall project cost. We plan deliveries, scaffold setups, and debris removal to minimize disruption to your tenants or customers and to keep the project moving efficiently.
During our initial consultation, we provide a clear breakdown of labor, material, equipment, and any required repairs so you understand exactly what is driving the investment in your brick veneer system.
Common Brick Veneer Issues and How We Prevent Them
Many veneer problems that show up years later begin during installation. Superior Masonry Fort Lauderdale puts a lot of effort into the details that prevent headaches for property owners. One common issue is water staining or efflorescence, the white, chalky deposits that appear on brick. We limit this by using quality mortars, installing proper flashing and weeps, protecting the wall during construction, and using cleaning methods that do not drive water and salts deeper into the brick.
Cracking is another concern, especially in our hot climate where walls expand during the day and contract at night. We design and install control and expansion joints at logical locations such as changes in building height, long wall runs, and around window openings. These joints allow controlled movement so the brick and mortar do not crack randomly.
Bulging or loose veneer can occur when anchors are improperly spaced, poorly fastened, or corroded. We strictly follow manufacturer specs and local codes for anchor type, spacing, and embedment. For rehabs of older buildings, we often open selective test areas to see existing ties and determine if they need to be supplemented or replaced.
We also plan ahead for ongoing maintenance. For example, we discuss with owners where future signage, lighting, and security cameras are likely to be installed so blocking or sleeves can be included without damaging the veneer later. This foresight helps keep your building envelope intact over the long term.
Our Process and What to Expect When You Work With Us
When you contact Superior Masonry Fort Lauderdale about a commercial brick veneer project, we start with a site visit and review of any available drawings or existing conditions. We walk the property with you, discuss how the building is used, and identify areas where the veneer can improve both performance and appearance.
Next, we prepare a proposal that outlines the veneer system type, brick and mortar options, anchorage approach, flashing details, and any necessary substrate repairs. If your project involves architects or general contractors, we coordinate directly with them to align on details and sequencing. For occupied buildings, we create a phasing plan so entrances remain accessible and tenant operations are disturbed as little as possible.
Before work begins, you will know where scaffolding will be placed, how we will protect landscaping, pavement, and adjacent businesses, and what hours we plan to work. During construction, our supervisors are on site to manage crews, inspect tie placement and joint tooling, and verify that flashing and weeps are installed as specified.
At completion, we conduct a final walkthrough with you, review maintenance considerations, and provide information on cleaning methods and any sealers used. Our goal is that your commercial brick veneer not only looks sharp on opening day but continues to perform well through many South Florida summers and storm seasons.
